Permatex Form-A-Gasket NO. 2 Sealant
Permatex Form-A-Gasket No. 2 Sealant is a black, viscous paste with a characteristic alcoholic odor. It is a slow drying, flexible setting paste that changes to a pliable, non-hardening film through solvent evaporation. It seals flanges, fittings, connections and flexible assemblies against leakage. It increases the reliability of gasket seals.
TYPICAL APPLICATIONS
➢ Valve cover gaskets
➢ Oil pan gaskets
➢ Threaded connections
➢ Cover plates
➢ Hose connections
Available in 11 oz tube.
Dynatex Blue RTV Gasket Maker Temperature resistant up to 500 °F (260 °C). Resists oil, water, anti-freeze and transmissions fluid. For valve covers, oil pans, transmission pans, rear-end housings, timing chain covers, thermostat housings, water pumps and oil pump flanges. Withstands the harsh conditions of Gear Oil, especially with differentials and transfer cases.
PRODUCT BENEFITS:
- Improves reliability
- Extends gasket life
- Stops leakage
- Excellent for metal to metal assemblies
- Slow drying
- Flexible setting
DIRECTIONS FOR USE
- Remove all previous material from mating surfaces. Permatex Gasket Remover is recommended for most materials, not for plastics or painted surfaces.
- For best results, clean and dry all surfaces with a residue-free solvent, such as Permatex Brake and Parts Cleaner.
- Remove cap, puncture tube or cartridge seal and attach extension nozzle (if provided).
- When used as a gasket dressing, spread product with a spatula to a uniform film on one side of gasket and then position it on the assembly. Coat the second side of gasket and re-assemble. Slower drying formula increases work time.
- Assembly is operational after 4 hours, full cure is
affected after 24 hours.