Turbine parting-plane sealing
Birkosit Dichtungskitt®
Single-component sealing paste for machined metal joints in turbines and critical rotating equipment. Remains elastic in service and permits immediate assembly and loading.
Technical detailsIndustrial sealing · Project Sales Corp
Specialist compounds for demanding joints.
Turbine parting planes. Generator end shields. Machinery gaskets. Local leakage repairs. Find the product and technical guidance for your application.
Our core range
Six product groups. Different sealing duties.
Select by equipment, joint condition and service medium. Each product page brings together applications, technical limits and practical selection guidance.
basic · 1000 · 2000
FILLING® sealing system
Three complementary paste compounds for turbine split joints and local surface damage. Choose the repair grade by measured damage depth, then use FILLING basic for the surrounding sealing face.
Technical details
Formerly Tite-Seal®
NIEL-SEAL™
Non-hardening gasket and joint sealing compound manufactured by Abbey Products, USA. The original product formerly marketed as Tite-Seal continues under the NIEL-SEAL name following the 2018 rebranding.
Technical details
RTV silicone gasket formation
Arexons Motorsil D
Acetic-cure RTV silicone for flexible sealing in machinery and automotive joints exposed to oil, moisture, heat and vibration.
Technical details
Steel-reinforced epoxy repair putty
QuikSteel 6004
Kneadable two-component epoxy stick for local repair and leakage sealing. After curing, the repair can be drilled, tapped, sanded and painted.
Technical details
Refractory and flue-gas sealing
PSC Froschmarke Boiler Putty
Potassium water glass-based refractory putty for high-heat boiler, furnace and stove sealing. PSC’s existing product information describes non-shrinking behaviour and resistance above 1000°C, including direct flame.
Technical detailsTurbine sealing
Match the compound to the surface.
Birkosit serves machined joints with damage up to 0.2 mm. The FILLING system extends local damage compensation to 0.5 mm and 1.0 mm, using compatible repair and surface-sealing grades.
Inspect the parting plane, measure the damage and confirm the assembly procedure before specifying the material.
Compare FILLING gradesTechnical library
Documents for selection and maintenance.
Application support
Tell us what needs sealing.
Share the equipment, joint or defect, medium, operating temperature and pressure. Include the required grade and quantity if already specified.
The form prepares an enquiry in your email application. You can attach photographs and send it from there.