PSC Hochdruck Fermit Putty

PSC Hochdruck Fermit is an non-toxic, non-drying, universal sealing compound, pasty putty, which is heat, steam and high pressure-resistant and does not dry up. The product is insoluble in water, is non-flammable and is a red brown paste based on natural rock dusts, oils and pigments !

Heat and high pressure-resistant sealing putty for sealing threads, flanges and faces on high-pressure equipment, turbine casings, steam lines etc. Is particularly suitable for sealing threads, flanges and faces on high- pressure equipment, turbine casings, steam lines etc. Can be used up to a pressure of 16 bar and up to +160 °C, briefly also up to +200 °C.

In sealing threaded connections up to 2 inch in diameter, hemp completely impregnated with Hochdruck- Fermit is used. For flanges and faces apply Fermit and then screw together firmly. The seals produced in this method with Hochdruck- Fermit can be stressed immediately and the connections can be undone again at any time.

 Available in 500grms box.

FEATURES:

  • Easy to work with
  • Heat and high pressure-resistant
  • Does not dry up
  • Reliable – safe

Non-toxic, pasty putty, heat and high presssure-resistant, does not dry up. Is particularly suitable for sealing threads, flanges and faces on high-pressure equipment, turbine casings, steam lines etc.

Threads: In order to ensure reliable sealing and preservation of the hemp the latter must be completely impregnated with hochdruck-fermit. For all threads according to DIN 2999 up to 2 inches in diameter.

Flanges and faces: Coat flanges and faces as well as the intermediate shim on both sides with hochdruck-fermit and then screw together firmly. The seals produced in this method with hochdruck-fermit can be stressed immediately and the connections can be undone again at any time



Temperature range:
-20 to +160 °C, briefly also up to +200 °C.



Pressure: maximum 16 bar